Fahrenheat LCHWD30 Manuel d'utilisation et d'entretien télécharger pdf

AIR CIRCULATOR ASSEMBLY AND

INSTALLATION INSTRUCTIONS

IMPORTANT: REVIEW ALL THE ASSEMBLY INSTRUCTIONS AND CHECK FOR MISSING

OR DAMAGED PARTS PRIOR TO STARTING ASSEMBLY.

In most cases, your fan head will come pre-assembled at the factory prior to shipping, if

not, follow instructions titled “Fan Head Unassembled”.

1. Remove fan head assembly from carton and check for missing or damaged parts.

2. Choose the mount for your application from the following pages, and follow mounting

instructions.

1. Remove motor, fan guard (front and back) and fan blade from cartons.

2. Secure back half of fan guard to studs on face of motor using washers,

lock washers and hex nuts. (See fig. 1)

3. Secure blade to motor shaft, with hub facing away from motor (Discharge

Side) for commercial and industrial models. Tighten set screw to flat side

of motor shaft. WARNING: Do not tighten set screw to round side of shaft

as it will cause damage to shaft and blade could come off. Set screw

must be tightened to flat of motor shaft. Failure to align and tighten to

flat on shaft may result in damage to shaft or may allow blade to come

loose.(See fig. 1).

4. Secure front half of fan guard to back by hanging guard at top and work-

ing hooks together down sides and across bottom. Snap hook in place

with screwdriver.

5. Follow directions for mounting head assembly on mount on the following

pages (Pedestal or Wall).

FAN HEAD UNASSEMBLED

Figure 1

Read Carefully – This instruction sheet contains vital information for the proper installation, use, and efficient operation of the

fan described. Carefully read this manual before installation, cleaning, or operation of the fan. Failure to adhere to the

instructions could result in fire, electrical shock, death, serious personal injury, or property damage. Save these instructions

and review frequently for continuing safe operation and instructing future users.

CAUTION – TO REDUCE RISK OF FIRE AND ELECTRIC SHOCK:

1. Before servicing or cleaning unit, unplug power to fan to prevent power from being switched on accidentally.

2. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and stan-

dards, including fire-rated construction.

3. When cutting or drilling into wall or ceiling, do not damage electrical wiring or other hidden utilities.

CAUTION: DO NOT MOVE FAN WHILE BLADE IS MOVING. ALWAYS TURN FAN OFF AND LET BLADE

STOP BEFORE ATTEMPTING TO MOVE. DO NOT USE BLADE GUARD TO MOVE FAN.

WARNING

SAVE THESE INSTRUCTIONS

FAN GUARD

BACK

FAN BLADE

HUB

FAN GUARD

FRONT

FLAT WASHERS

LOCK WASHER

NUT

1 2 3 4

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

AIR CIRCULATOR ASSEMBLY ANDINSTALLATION INSTRUCTIONSIMPORTANT: REVIEW ALL THE ASSEMBLY INSTRUCTIONS AND CHECK FOR MISSINGOR DAMAGED PARTS PRIOR TO STA

Page 2 - FIXED PEDESTAL COLUMN

ADJUSTABLE PEDESTAL COLUMN1. Remove 2 sections of adjustable pedestal columnfrom carton(See fig. 2). Remove oval grommetfrom parts package and install

Page 3 - I-BEAM MOUNT

WALL MOUNTCEILING MOUNTI-BEAM MOUNT1. Securely attach wall mount to either a wood or concrete wall.(See fig. 7)For installation on wood construction (

Page 4 - CLEANING OR MAINTENANCE

REMOVAL OF FRONT GUARD FORCLEANING OR MAINTENANCESECONDARY SUPPORT CABLE INSTALLATIONFOR WALL/CEILING AND I-BEAM MOUNTS1. Turn off fan and unplug from

Commentaires sur ces manuels

Pas de commentaire

Fahrenheat LCHWD30 Manuel d'utilisation et d'entretien

Naviguer en ligne ou télécharger Manuel d'utilisation et d'entretien pour Ventilateurs des ménages Fahrenheat LCHWD30. Fahrenheat LCHWD30 Use and Care Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels